SS-100

Torque Detector (10Nm)

SS-100

The SS series is our most basic and widely usable torque detector suits to variety of torque measurement application, including performance test of motors, pumps, compressors, blowers, turbines and gears. 13 models in the series can be provided and chosen among them according to requirement in torque capacity.

    • Rated torque: 0.2 ~ 2000 N・m
    • Rated rotation speed: 5,000 r/m, 6,000 r/m or *8000 r/min (SS-100, SS-200)
    • Wide measurement range: Up to approximately 180% of rated torque continuous measurement is applicable.

SEND Inquiry

Specifications

Measurement Accuracy 0.2 % F.S. (When combined with the TS-2800/3200A (N-0 correction.))
Temperature Effect at Zero Point + 0.03 % F.S./℃
Rotation Detector (sold separately) MP-981
Operating Temperature / Humidity Range From 0 to +40 °C / 85 % or less.
Storage Temperature Range From -20 to +60 °C
Vibration Resistance 50 m/s2 or less
Applicable Connector TRC116-12A10-7M10.5
Gear Teeth for Rotation Detector 60 P/R (Standard accessory)
Power Supply 100 VAC 50/60 Hz
Standard Accessories Power cable (2.4 m), Torque signal cable (5 m), Shaft-end key (Only for SS-100 to 202)

Notes

Options:

  • Torque Signal Cable (TH-series cable)
  • Magneto-electric rotation detector MP-981
  • Rotation signal cable MX-8100-series
  • SS-0004 External control of the rotation direction. (The rotation direction of the motor with a detector can be switched externally. Only wiring, not including selection switch.)
Copyrights © 2018 All Rights Reserved
info@onosokki.net · 630-627-9700 · Privacy Policy