MB-2200M10 is an ultra compact and lightweight microphone that enables measurement in narrow spaces, where have been difficult to install, without giving influence to the sound field. Its compact and lightweight features make you possible to perform measurements in a limited space, such as multi-point measurement, and measurement near the sound source. As CCLD type, the MB-2200M10 can be connected to Ono Sokki’s FFT Analyzer or CCLD supported devices.
$772.00
Specifications
| Frequency Range | 200 Hz to 16 kHz (± 2.5 dB) |
| Responce Type | Free Field Type |
| Sensitivity | -37.0 ± 3 dB re.1 V/Pa (14 mV/Pa) |
| Maximum Sound Pressure Level | 114 dB or more (1 kHz, total harmonic distortion : 3 %) |
| Intrinsic Noise Level | 36 dB or less (A-weighting) |
| Operating Temperature Range | -30 to +80 °C (within 2500 mm from tip of the sensor part) / 0 to +50 °C (2500 mm or more from tip of the sensor: until the connector part of a preamplifier) |
| Operating Humidity Range | 0 to 90 % RH (With no condensation) |
| Storage Temperature Range | -10 °C to +60 °C |
| Storage Humidity Range | 0 to 90 % RH (With no condensation) |
| Power Requirement | Driving method: CCLD (Constant current drive) / Driving current: 2.2 mA to 4.9 mA (Rated 4.0 mA) / Driving voltage: DC18 V to 26 V (Rated 24 V) |
| Outer Dimensions | Sensor section: 4.7 (W) x 7.1 (D) x 3.3 (H) mm / Preamplifier section: φ13.6 x 46.8 mm (including BNC connector) / Cable section: 2850 mm |
| Weight | Approximately 48 g (Sensor section only: approximately 0.3 g) |
| Accessories | Data sheet x 1 / Instruction manual (Japanese/English)x 1 for each |
